Download Ntldr File

Amd radeon apu driver

Update 2016-01-17: It's possible that 'bigger' or 'smaller' than 2 gigs makes a difference, if buying a drive, try and buy one bigger than 2 gigs and one sma. The NTLDR file is responsible for booting all versions of the Windows NT operating system, and is usually found in the main directory of the active partition of the boot drive. For this reason, when our computer tries to access the operating system and is unable to do so, a warning appears on the screen indicating “NTLDR is missing”, so the.

  1. Ntldr File Download
  2. Missing Ntldr Windows Xp
  3. Download Ntldr For Windows Xp
  • Free Ntldr Download Boot Disk; Fix Ntldr Is Missing; Press CTRL-ALT-DEL to restart NTDETECT V1.0 Checking Hardware. NTDetect Failed Boot.ini invalid Invalid Boot.ini NOTE THAT these files are vital to boot! NTLDR (NT Loader) is the library to load the Windows kernel at boot.
  • Copy the Ntldr file, the Ntdetect.com file, and the Boot.ini file from the boot disk to the system partition of the local hard disk. Method 2: Use the Recovery Console. Use the Windows 2000 Setup disks to restart the computer, or use the Windows 2000 CD-ROM to restart the computer.

Get the fix to the NTLDR is corrupt boot error message affecting Windows XP.


  • 1 About the “NTLDR is corrupt” error
    • 1.1 Description and Symptoms
    • 1.2 Causes of this Error
  • 2 Fixing “NTLDR is corrupt” on Windows
  • 3 More Information

About the “NTLDR is corrupt” error

The following information on this error has been compiled by NeoSmart Technologies, based on the information gathered and reported by our global network of engineers, developers, and technicians or partner organizations.

Description and Symptoms

The error messages, alerts, warnings, and symptoms below are tied to this error.

Symptom 1: NTLDR is corrupt error screen on startup

When a computer is turned on, the BIOS picks an eligible, bootable hard drive and then calls code stored in the MBR at the start of that hard drive. That MBR code in turn loads the bootsector from the active partition. On Windows XP, this bootsector code is tasked with loading NTLDR (the Windows XP bootloader) and its dependencies, which are used to load the operating system kernel and start up Windows. The NTLDR file is normally located in the root directory of the active partition on the first boot drive. However, if the NTLDR file or any of its dependencies are corrupt, the loading process halts and the “NTLDR is corrupt” error screen appears.

For more information on how computers start up and how the Windows XP boot process works, please refer to the respective pages in our extensive wiki and knowledgebase.

Causes of this Error

This error has been known to occur as a result of the following cause:

Cause 1: NTLDR-related files are corrupt

On Windows XP, Windows 2000, and Windows 2003 Server this error may appear if any of boot-related files(Ntldr, Ntdetect.com and Boot.ini) are missing or corrupt. These files are normally hidden and system protected, but they can still go bad because of user errors, power outages, or virus attacks.

Fixing “NTLDR is corrupt” on Windows

Windows Setup CD/DVD Required!
Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below.

Fix #1: Rebuild NTLDR via Easy Recovery Essentials

Easy Recovery Essentials’ one-click automated system repair corrects issues caused by misconfigured NTLDR bootloader files by recreating them from scratch on the active bootable partition for Windows XP, 2000 and 2003 Server. Alternatively, on newer versions of Windows, EasyRE writes the correct bootsector code to the partition to make sure that the newer BOOTMGR bootloader is correctly installed and configured. This is done automatically as part of the automated repair process, and requires no manual action or user intervention.

Easy Recovery Essentials is guaranteed to fix the “NTLDR is corrupt” error automatically using its built-in Automated Repair option. EasyRE is currently available for Windows XP, Vista, 7 and 8 and can be downloaded and created on any PC.

  1. Download Easy Recovery Essentials. Make sure to note your Windows version (XP, Vista, 7 or 8) before you download EasyRE. This guide can help you identify what version of Windows you have installed.
  2. Burn the image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot up your PC from the Easy Recovery Essentials CD or USB you created.
  4. Once EasyRE is running, choose the “Automated Repair” option and click Continue.

    Choose “Automated Repair” in Easy Recovery Essentials

  5. After EasyRE scans your computer’s drives, identify and select the drive letter for your Windows installation from the list, and then click on the Automated Repair button to begin.

    Choose the drive associated with the Windows installation you’re trying to repair.

  6. Easy Recovery Essentials will start analyzing the selected drive for problems. EasyRE will test for and attempt to automatically correct errors with the disk, partition, bootsector, filesystem, bootloader, and registry. No intervention is required, as EasyRE’s repair is fully automated:

    Easy Recovery Essentials searches for errors and makes corrections to the selected Windows installation.

  7. Once the process is complete, EasyRE will report its findings. Click on the Restart button to reboot your PC and test the changes.
  8. The “NTLDR is corrupt” error should now be fixed as your PC begins to load:

You can download Easy Recovery Essentials from here.

Fix #2: Replace NTLDR and NTDETECT.COM files

Windows XP users can replace the required files for NTLDR to load correctly by using your Windows Installation Disc. The files are named NTLDR and NTDETECT.COM.

Here are the steps to replace these files:

  1. Insert the Windows XP install CD in your CD drive
  2. Restart the PC and boot from the CD
  3. Press any key to boot from the CD
  4. Press R after the Windows Options menu is done loading to access Repair Console
  5. After this step, log into Windows by pressing 1 using the Administrator password
  6. Use the following commands to copy the NTLDR and NTDETECT.COM files from the Windows installation disk to the hard disk:

    Where D: is the install CD’s drive letter and C: is the Windows XP partition’s drive letter

  7. Once these files are copied, remove the Windows installation disc from the disc drive
  8. Restart the PC

Here is an example of what the PC’s console output should look like once NTLDR and NTDETECT files are properly restored:

Replacing ntldr and ntdetect.com files

Fix #3: Rebuild boot.ini file

The next steps are to rebuild the boot.ini file:

  1. Insert the Windows XP install CD in your CD drive
  2. Restart the PC and boot from the CD
  3. Press any key to boot from the CD
  4. Press R after the Windows Options menu is done loading to access Repair Console
  5. After this step, log into Windows by pressing 1 using the Administrator password
  6. Enter the following command when Command Prompt appears:
  7. When the systems prompts about whether it should add an identified Windows installation to the boot list, answer “Y”(Yes)
  8. Enter “Windows XP” as Load Identifier and “/fastdetect” as OS Load Options.
  9. Remove the install CD
  10. Restart the PC

Here is an example of what the PC’s console output should look like once the boot.ini file is properly restored:

More Information

Linked Entries

Support Links

  • Easy Recovery Essentials for Windows – our repair and recovery disk.
    It’s an easy-to-use and automated diagnostics disk. It’s available for Windows 8, Windows 7 and Windows Vista. It’s also available for Windows XP and Windows Server.

    Read more at Windows Recovery Disks.

  • The NeoSmart Support Forums, member-to-member technical support and troubleshooting.
  • Get a discounted price on replacement setup and installation discs: Windows XP.

Applicable Systems

This Windows-related knowledgebase article applies to the following operating systems:

  • Windows XP (all editions)

The infamous “NTLDR is missing” error is not strange to many of us, which occurs during Windows startup. Actually, NTLDR is a boot component file of Windows XP that is not necessary needed by Windows 7. Instead, Windows 7 uses a new boot component file which is known as BootMgr. If you receive the ntldr missing error message when you are booting Windows 7, your PC is present in a dual boot environment with Windows XP or Windows 2003. In this post we elaborate on how to fix “NTLDR is Missing” Error in Windows 7.

Windows 7 NTLDR is Missing Solution

Following the steps below to resolve the ntldr is missing issue on Windows 7 startup.

Method # 1: Use Windows 7 installation disc for system repair

1. Insert the Windows 7 setup or System Repair disc into CD/DVD drive of your computer.

2. Restart the computer. Press F12 to access the boot menu and set CD/DVD as the primary boot option.

3. Press any key to boot from the inserted disc when you are prompted “'Press any key to boot from CD or DVD…'.

4. In the installation windows, please choose language, format and input method. Make appropriate selections and click Next button to continue.

5. Choose “Repair your computer” option, not “Install now”.

6. In the next windows, it lists all installed operating systems, choose appropriate OS from the list and click on Next.

7. From the System Repair Operations windows, choose Startup Repair. Wait for the process to complete.

After repair process completes, it will restart the computer. The ntldr missing problem should be fixed. If this cannot help fix the issue thoroughly, go and try method #2.

Method #2: Bootrec and Check Disk (chkdsk)

Follow step 1-5 from the method # 1.

Ntldr File Download

Step 6. Choose “Command Prompt” choice in System Repair Operations, instead of selecting “Startup Repair”.

Step 7. In the pop-up command window, please type in the following commands:
bootrec /FixMbr
Bootrec /FixBoot
Bootrec /RebuildBcd
chkdsk drive: /f
chkdsk drive: /r

Note: Replace the drive :/ with the proper drive where your Windows 7 operating system locates.

After this, eject the repair disc and restart the computer. You should be able to enter the system without any error message.

Extend Knowledge

Another headache that may trouble us much is Windows login password lost or forgotten. A Windows password key tool can be your ultimate solution. It can remove/reset the password for Windows Administrator /local accounts easily through creating a bootable disc. The absolute advantage of this software is that you can recover the password just by following the onscreen guide, even you are a newbie.

Related Articles
How to Boot a Computer from CD ROM
The Easiest Way to Recover Windows 7 Password
How to create an administrator account on Windows 7

Missing Ntldr Windows Xp

Please enable JavaScript to view the comments powered by Disqus.comments powered by

Download Ntldr For Windows Xp